3D-Printed Ultra-Wideband In-Band Full-Duplex Antenna System With Grating Lobes Reduction - Département STIC Accéder directement au contenu
Communication Dans Un Congrès Année : 2022

3D-Printed Ultra-Wideband In-Band Full-Duplex Antenna System With Grating Lobes Reduction

Résumé

This article presents an ultra-wideband in-band full-duplex antenna system based on a special 3D-printed Vivaldi array. To mitigate grating lobes inherent in such arrays, the single Vivaldi element size is reduced partially at its bottom and its body is exponentially tapered. In the array, this allows bringing the antennas closer together at their bottom parts, reducing the distance between the radiating slots, which translates to grating lobes reduction, especially at higher frequencies. The system can achieve, in simulation, a decade matching bandwidth from 2 to 20 GHz with more than 60 dB of self-interference cancellation and 12.8 dBi of average gain. The grating lobes remain at least 10 dB below the main lobe level throughout the matching bandwidth.
Fichier principal
Vignette du fichier
ICM_Paper_Final_Hadi_Hijazi_2022.pdf (1.05 Mo) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-04609646 , version 1 (12-06-2024)

Identifiants

Citer

Hadi Hijazi, Marc Le Roy, Raafat Lababidi, Denis Le Jeune, Andre Perennec. 3D-Printed Ultra-Wideband In-Band Full-Duplex Antenna System With Grating Lobes Reduction. 2022 International Conference on Microelectronics (ICM), Dec 2022, Casablanca, Morocco. pp.86-89, ⟨10.1109/ICM56065.2022.10005440⟩. ⟨hal-04609646⟩

Relations

13 Consultations
2 Téléchargements

Altmetric

Partager

Gmail Mastodon Facebook X LinkedIn More